Vikay Pneumatic Cement Injection Pump
Vikay Pneumatic Cement Injection Pump for Underground Mines
The Pneumatic Cement Injection Pump is used in Underground Mines, specially designed for Cement grouts & spraying water based Binder, where low volume and high pressure is required.
The major attraction of Pump is its portability, light weight, & rugged enough to withstand the normal mines handling, easy to maintain in case of any blockages
- Roof Bolung & Cable Grouting Fully Grouted Bolts & anchors installed by pregrouting or post injection
- Long hole grouting from 3m to 20m, can be injected with cemetitious or other mixer (water based resins etc) in ratio from 1 : 033 upto 1 : 2
- Ventilation control by spraying on to walls and prefabricated meshes.
- Injection of Grouts, set props with a modification to produce high pressure setting up to 500 psi
|Weight||22 Kgs for Pump|
|Dimension (L x W x H)||8” x 24” x 44” (L x W x H)|
|Air Pressure||90 – 100 cfm @ 70 – 80 psig|
|Operation Control||One Valve Operation|
Scope of Supply
A special grout mixer including 2 No. drums of 75 litres capacity, with mixing blades, air motor and torque multiplying speed reduction gear box
Since approvement are made from time to time, the illustration and specifications are subject to change without notice.