.png "miningequipment")
Wagon Drill - DTH version
Description
Wagon Drill DTH version VKPWD-DTH
Vikay Pneumatic Wagon Drill suitable for Top Hammer and Down the Hold Drilling
A robust rubber tyre three wheel pneumatic Wagon Drill, with the option of TH version Top Hammer and DTH Version Down-the-hole Hammer, which is an alternative to mechanization of hand held drilling.
The Wagon Drill design for production drilling in open-cast mines and quarry, grouting, anchoring with special shortened mast, used for production drilling in underground mines.
Optional Conversion Kit to convert TH version to DTH Version and Vice-versa.
DTH version (Down-The-Hole Hammer)
The DTH version is fitted with powerful piston type rotation Air motor, Type BBR-4, suitable for Pneumatic 3 and 4 DTH Hammers. Offering a wide selection of drill hole sizes from 85 to 130 mm, and depth upto 40 Meters.
Technical Details
DTH Version (Down-The-Hole hammer)
| Rotation Drive Unit | Type BBR-4, Thread - API 2 3/8 |
| Hole Diameter | 85 - 130 mm |
| Drill Tube Diameter | 70 / 76 mm |
| Drill Tube Length | 1.20 Meter, 2.50 Meter, 3 Meter |
| Max. Operating Pressure | 12 Bar Max. |
| Maximum Torque | 900 Nm |
| Air consumption | 450 CFM @ 10.5 Bar |
| Suitable Hammer | 3", 4" Hammer |
Feed and boom
| Feed type | Chain drive |
| Feed length, total | 5,430 mm, 4425 mm, 2825 mm |
| Travel length | 3,940 mm, 2200 mm, 1500 mm |
| Feed force | 8 kN 1,800 lbf |
| Boom type | Single section Hand Operated Hyd. Cylinder |
| Drill control panel | Side mounted |
Carrier
| Traction type | Pneumatic wheel drive |
| Tramming speed, max | 2 km/h 1.3 mph |
| Traction force, max | 7.8 kN 1,750 lbf |
| Hill climbing ability | 20 degrees |
| Track oscillation | N/A |
| Ground clearance | 310 mm 1 |
Since approvement are made from time to time, the illustration and specifications are subject to change without notice.
Opps
Sorry, it looks like some products are not available in selected quantity.
